Will Benz softwash products harm rubber or metal trim around windows and doors?
A customer asked us: "Will your softwash products harm windows and doors when softwashing a house? I'm thinking of the rubber trim, metal handles, etc?"
We replied:
Benz Bio Cleanze is safe for all known surfaces at our recommended dilution rates.
Benz Lightning Cleanze is categorised as non-corrosive to metals and rubber when used at a dilution of 10:1.
If you use Lightning Cleanze at higher dilution rates – say 5:1 or, exceptionally, 4:1 – then we recommend rinsing metal and rubber immediately prior to application and immediately after. And use skilful spray techniques to minimise chemical contact with rubber and metal fittings.
We've experienced no problems using this approach, nor have any of our customers reported any problems.
For contractors who are unsure of their ability to direct the spray accurately enough to keep the product away from vulnerable doors and windows, we suggest leaving these until last and completing them by brushing rather than spraying.
We hope this information is helpful and sincerely wish you great success in your soft washing business.
Cheers,
Ben, Leo, Fiona, Stevie & Anthony
PS: After completing the first softwash treatment, put your customer on a "Clean & Maintain" ongoing maintenance programme.
Your customers will enjoy a permanently clean property and you will enjoy a steady stream of repeat business. A win-win arrangement for everyone.
Click here to explore the full range of Benz softwash cleaning products
Leave a comment
Comments will be approved before showing up. Please revisit to read our response.
Also in Benz Trade Tips
How to clean sh stains from lead flashing with Oxy Cleanze
Sodium hypochlorite can react with lead flashing and discolour it. Benz Oxy Cleanze can fix this.
Click the link on this page to find out how ...
How to remove sodium hypochlorite oxidation stains from lead
A customer asked: "I put Benz Oxy Cleanze on a lead flashing. It's come up very bright and from a distance looks white. Is that normal?
Click the link on this page to find out ...
When to pressure wash – and when not to pressure wash?
After pressure washing (power, jet) algae spores rapidly recolonise, and properties return to square one in a very short time. So what's the alternative?
Click the link on this page to find out ...