Complete pressure pole setup including the Benz Zap Max 35 full carbon pole, HP-4000 trigger, flat surface cleaner and twin turbo nozzles for professional roof preparation.
Product Overview
The Benz Pressure Pole Bundle provides a complete high reach pressure cleaning setup for removing moss, heavy debris and loose material from suitable roofs before softwash treatment.
At the heart of the bundle is the Benz Zap Max 35 full carbon pole, giving contractors the extra reach, strength and rigidity needed for demanding pressure pole work.
Combined with the Benz HP-4000 sliding trigger, high pressure hose and specialist roof cleaning attachments, the bundle allows preparation and rinsing work to be carried out from ground level or a suitable access position without needing to work directly on the roof.
What’s Included
- Benz Zap Max 35 full carbon pole
- Benz HP-4000 sliding pressure pole trigger
- Flat surface cleaner
- Twin Turbo Power Pole Attachment
- Benz double rinsing nozzle
- 35ft thermoplastic high pressure flexible hose
What It’s For
The Pressure Pole Bundle is designed for contractors who need additional reach for roof preparation, rinsing and other high level pressure cleaning work.
- Removing moss and heavy roof debris before softwash treatment
- Reducing or eliminating manual roof scraping where the tiles or slates are suitable for pressure cleaning
- Pressure pole rinsing of roofs and rooflines
- Preparing suitable tiled and slate roofs before Bio Cleanze treatment
- High reach exterior cleaning where direct roof access can be reduced
Always inspect the roof beforehand and make sure the roofing material and its condition are suitable for the pressure and cleaning method being used.
Benz Zap Max 35 Pole
The bundle is supplied as standard with the Benz Zap Max 35, our full carbon workhorse pole for demanding professional exterior cleaning.
Full carbon. Max strength. Max rigidity. Max durability.
The 35ft reach makes it particularly well suited to pressure pole work, while the rigidity of the full carbon construction helps give the operator greater control of the attachment at height.
For roof preparation, that rigidity becomes especially important when using equipment such as the Twin Turbo attachment, flat surface cleaner and rinsing nozzles.
Roof Preparation Before Soft Washing
Where the roof surface is suitable for controlled pressure cleaning, the Pressure Pole Bundle can considerably reduce the amount of manual scraping required.
The Twin Turbo attachment uses two very fine rotating jets to provide concentrated cleaning impact across a wider area. On suitable tiles and slates, this can help remove moss and heavier debris efficiently before the final softwash treatment is applied.
Once the bulk material has been removed, Bio Cleanze can be applied to treat the remaining biological growth and provide the longer term softwash treatment.
HP-4000 Sliding Pressure Pole Trigger
The Benz HP-4000 gives the operator direct control of the pressure washer at the pole.
The trigger slides along the pole so it can be positioned to suit the operator and working height, making the pressure pole setup easier to control as the pole is extended or shortened.
HP-4000 specifications:
- Maximum pressure: 300 bar / 4000 psi
- Maximum flow: 120 L/min
- Maximum temperature: 100°C
Do not operate above 100°C as excessive heat may damage the trigger seals.
Professional Use
The combination of the Zap Max 35, HP-4000 trigger and interchangeable pressure cleaning attachments gives contractors a versatile setup for roof preparation and high level exterior cleaning.
The different attachments allow you to adapt the pole for removing heavier material, targeted cleaning and rinsing without needing a separate pole system for each stage of the job.
Video Demonstration
Watch the video below to see the Benz Pressure Pole Bundle in action.