Are pencil jets or fan jets best for soft washing brushes?

July 21, 2021

Softwash chemical application kit

 

We use pencil jets in our brushes because we've found they don't clog or break as much as fan jets.

In the case of the Gardiner 45cm brush we use four of them. We turn the pump down so the flow rate is acceptable and does not produce much run-off.

Flow control at the pole is still critical however. When treating a roof for example, we often turn the flow off completely for a period of time and brush in the product that is flowing down the roof.

Quick tip: Without good flow control pencil jets can use more chemical than fan jets, which is why we invented the trigger system. It's important to be able turn off the flow quickly, and to vary the flow rate, which massively reduces the amount of chemical used and solves the problem.

Click here to take a look at our Softwash Chemical Application System (as seen in the photo above). It allows you to regulate the flow and solves a lot of application problems.

We sincerely wish you great success in your soft washing business,

Ben, Leo, Fiona, Stevie & Anthony

 

Benz Softwash Bio Cleanze DDAC biocide & Benz Softwash Lightning Cleanze SH sodium hypochlorite biocide

Leave a comment

Comments will be approved before showing up.


Also in Benz Trade Tips

How to safely soft wash asbestos roof slates, tiles & sheeting
How to safely soft wash asbestos roof slates, tiles & sheeting

September 15, 2021

Many soft wash contractors can be unsure of the safest way to soft wash asbestos roofs. So in this post we lay out the best practices we've learned from running a soft washing business since 2013.

Click the link on this page to learn how to treat asbestos ...

View full article →

How to soft wash natural slate roofs
How to soft wash natural slate roofs (video)

September 08, 2021

Ben demonstrates how to scrape moss and lichen from natural slate roof tiles and treat the biofilm to kill all the growths on this natural slate roof.

Click the link on this page to watch the how-to video ...

View full article →

Soft wash brush application
How to protect lead flashing & roofs when soft washing (video)

September 02, 2021 2 Comments

When soft washing it's vitally important to protect surrounding building materials. e.g. lead flashing. And not to create "clean streaks" – from overspray and run-off – on surfaces that are not part of your contract.

Click the link on this page to watch how we achieve this when soft washing a chimney ...

View full article →