July 02, 2022
When soft washing roofs that have a lot of lead flashing, sodium hypochlorite (sh, hypo) may react with the lead and discolour through oxidation.
Rinsing prior to soft washing with any sodium hypochlorite product, rinsing during soft washing, and then a final rinse when the soft wash treatment is complete, will go a long way to protect the lead.
Of course sometimes rinsing alone just isn't enough.
That's where Benz Oxy Cleanze oxidation removal gel comes in.
New lead has a whitish/blueish appearance that "dulls down" to the grey colour everyone is familiar with.
Oxy Cleanze will quickly remove oxidation stains on lead flashing caused by natural oxidation and soft washing with sodium hypochlorite.
Quick tip: Modern lead may not be pure and so can discolour over time. Benz Oxy Cleanze cannot reverse this form of reaction.
We coated the lead in the photo below with neat Lightning Cleanze and left it for 60 minutes. Then we rinsed and dried it. The temperature was 6 ℃.
In the photo below we applied Oxy Cleanze rust remover by brush and left it to work.
The photo below shows the results after only 30 minutes.
Two hours later we rinsed the Oxy Cleanze gel from the lead.
The results we achieved would be satisfactory for most lead restoration work, after lead has been cleaned with a sodium hypochlorite based product.
Apply a second coat if needed. In the photo below the far right section was treated a second time. We left this overnight and rinsed the oxidation removal gel from the lead.
Quick tip: It was winter and cold when we ran these tests. We do not recommended leaving a treated surface overnight during the warmer summer months.
The photo below shows what the lead looked like when dry. Notice that it looks brighter and more blue/white than the dull grey we are used to seeing on lead flashing.
The treated lead will gradually "dull down" with age (the change of background colour was due to poor lighting conditions).
Back to top
On the property below, one application of Oxy Cleanze was enough to remove the yellow staining caused by soft washing with sodium hypochlorite, along with some ingrained oxidation.
After four hours at 5 ℃ we thoroughly rinsed Oxy Cleanze rust removal gel from the lead flashing with ordinary tap water, using a garden hose and some light brushing. The photo below shows the result:
Quick tip: The deeply ingrained oxidation, which had built up over many years, could not be removed without the repeated use of Oxy Cleanze, which could cause whitening of the lead .
This may be undesirable in some situations and for some customers. So always inform your customer of the possible results of repeated applications of Oxy Cleanze and let your customer make the decision as to whether to go ahead.
Fortunately, natural weathering will reverse the whitening over time. As you can see in the above photo, where the lead flashing is tarnishing and dulling down.
We hope this information is helpful and sincerely wish you great success in your soft washing business,
Ben, Leo, Fiona, Stevie & Anthony
How to find answers to most soft washing questions: Simply enter a relevant "keyword" or short phrase – e.g. keyword for the above link = "how to" – into our in-site Search Engine (magnifying glass icon on the main menu).
Click here to download our Product Documentation Pack (includes Application & Dilution guides, SDS, PDS, RAMS, PPE & Mask info, COSSH, sample Contract and more)
GB (England, Scotland, Wales)
Phone: 0800 70 74 222
Ireland and other countries
Phone: 00353 214 622 978
Lines open Monday - Friday, 9am – 5pm
Please note: The above numbers are for orders only (click here for tech support)
PS: Click here to set up your "Clean & Maintain" programme. After completing an initial soft wash treatment, put your customer on a "Clean & Maintain" ongoing maintenance programme. Your customers will enjoy a permanently clean property and you will enjoy a steady stream of repeat business.
This is clearly a win-win arrangement for you and your customers.
Comments will be approved before showing up. Please revisit to read our response.
August 07, 2022
This week we're going to tell you a story about two businesses. One prospered while the other struggled to survive. Why was that?
Click the link on this page to find out ...
July 31, 2022
What's the best way to remove rust stains from stainless steel, caused by contamination with carbon steel?
Click the link on this page to find out ...
It's a free resource for people wanting to learn about the soft washing industry, to expand an existing business, or build a new business.
Soft washing reduces, or even eliminates, the need to use high-pressure washing.
Instead, once the build up of algae, lichen, fungus, moss and mould – the root causes of properties looking "dirty" – has been treated, the natural "self-cleansing" of sun, rain and wind removes the surface residue through time.
By educating the cleaning trade and public about soft washing we are helping develop an industry that offers sustainable treatments to clean and maintain exterior hard surfaces.
Subscribe to our free trade tips blog to download your "Professional Soft Wash Contractors Pricing Guide".
The free guide shows you – step by step – how to easily, quickly, and accurately create softwash business quotes.
This saves you time, is a highly professional approach, and increases your chances of winning new contracts.