Menu
0
Home   /   Benz Trade Tips   /   How to soft wash steel cladding, eg Kingspan Cladding (video)

How to soft wash steel cladding, eg Kingspan Cladding (video)

March 22, 2016 4 Comments

How to soft wash steel cladding, eg Kingspan Cladding


There's loads of highly profitable work available in soft washing steel and aluminium industrial cladding because the soft wash approach is far more cost-effective, faster, and easier than power / pressure washing.

The best-known brand of steel cladding is Kingspan Cladding, who have confirmed that Benz Lightning Cleanze is suitable to safely and effectively soft wash Kingspan steel cladding.

Watch the short how-to video below to learn how to soft wash Kingspan industrial cladding using Lightning Cleanze at only 10:1 dilution 

 

We hope this information is helpful and sincerely wish you great success in your soft washing business,

Ben, Leo,
 Fiona, Stevie & Anthony

Click here to explore the full range of Benz softwash cleaning products

Benz Softwash Bio Cleanze DDAC biocide & Benz Softwash Lightning Cleanze SH sodium hypochlorite biocide

4 Responses

Leo
Leo

April 26, 2016

Hi Jamie – Ben is about to treat exactly that surface in a playground. So we’ll let you know the results in a few days.

best wishes,

Leo

Jamie sulway
Jamie sulway

April 25, 2016

Hi just looking for some advice on cleaning wet pour play surfaces
(The soft area in play grounds) has anyone cleaned any before and what would be best to clean with ?
Thanks jamie

Leo
Leo

April 18, 2016

Hi Joe and thanks for your question,

I am unsure what Kingspan “pdf” cladding is. Could you give more details?

Certainly with regular Kingspan steel cladding Blackwash at 10:1 should easily take care of the problem. In the video you see Ben using Blackwash at 10:1 on steel cladding and there’s no need to follow up with Biocidal Wash.

On render we recommend post-treating with Biocidal Wash no later than 12 months following initial cleaning with Blackwash. This will ensure the spores are killed deep into the render and will leave a residual protection that will ensure your customer can enjoy clean render for 2-3 years on average (depending on prevailing weather and location – can be longer). You can post-treat on the day of cleaning with Blackwash if your customer wants the best possible clean and protect service and is willing to pay the extra.

I hope this helps.

best wishes,

Leo

Joe Wadeson
Joe Wadeson

April 13, 2016

Hi guys. We are new to your products and have started using the blackwash on a coloured render job which is working well.

I have been asked about cleaning a garage with kingspan pdf cladding its not too bad but has black stains running under fittings will 10:1 ratio get those off ok normally?

Thanks

Joe

Leave a comment

Comments will be approved before showing up. Please revisit to read our response.

Also in Benz Trade Tips

How to remove rust stains from render
How to remove rust stains from render

April 12, 2024

Rust stains on renders caused by flue pipes, satellite dishes, mild steel fixings, overflow pipes, etc, can be easily removed.

Click the link on this page to find out how ...

View full article →

Understanding the complex world of softwash product approvals
Understanding the legalities of softwash product approvals

April 05, 2024 2 Comments

In today's world of "false facts" how can you know which softwash products are legal to use and which are not?

Click the link on this page to find out ...

View full article →

Spring Newsletter 2024
Spring Newsletter 2024

March 29, 2024

Welcome to our Spring quarter newsletter 2024. We catch up about all our softwashing news and discuss issues happening in the trade this season.

Click the link to read more.

View full article →